WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : CK-CK17RG  Mfr Ref : CK17 RG

    CK17 Rigid Torch Head, Gas Cooled 150A
    CK17 RG CK-CK17RG

    £23.88  EX VAT
    SSP Suggested Selling Price = £47.75  YOU SAVE £23.88

    WP-17.

    CK17 Torch Parts FAQs

    Torch heads, handles, back caps and power cables for a gas-cooled TIG torch, and how to match the right part to your torch.

    What is the difference between torch body parts and consumables on a gas-cooled TIG torch?icon-minus-redicon-plus-red

    Torch body parts are the larger items that make up the torch itself: the head, the handle and the power cable assembly. Consumables, which some makers call expendables, are the smaller front-end parts that wear and are replaced: collets, collet bodies or gas lenses, cups, insulators and back caps.

    Back caps are the borderline case. They are often grouped with torch parts, but makers class them with the front-end expendables because they hold the tungsten and seal the rear of the head. Body parts usually last longer, but heat, bending and repeated tightening age them too. Your torch manual shows how each part is named.

    Should I choose a rigid or a flexible torch head?icon-minus-redicon-plus-red

    A rigid head is fixed in place, which makes it consistent and repeatable from weld to weld. A flexible head can be bent to different angles, which helps with awkward joints. Some makers also make a flexible head with a gas valve, which is useful with a power source that has no gas valve of its own.

    A rigid head is not designed to be bent, so do not try. A flexible neck is a moving part, so follow the manual on how far and how often it may be bent. When replacing a head, choose the same style, series and cooling type that your handle and cable are made for.

    What does back cap length do, and how do I choose between short, medium and long?icon-minus-redicon-plus-red

    The back cap holds the tungsten firmly in place and keeps air from leaking into the torch head. Makers supply long, medium and short sizes.

    A long cap can be screwed on over a standard full-length tungsten. Medium and short caps keep the torch more compact, and the short, button-style ones are convenient in small, tight spaces, but the tungsten has to be cut into a shorter piece so the cap can screw home. The cap must be the right size for your torch series, and the collet and collet body behind it have to suit the same series. Check the manual before ordering.

    How can I tell if the back cap O-ring is leaking, and what happens if it is?icon-minus-redicon-plus-red

    The back cap relies on a small O-ring to seal the rear of the head. Heat and repeated tightening can make it dry, crack or flatten. If the seal fails, air can be drawn into the shielding gas, which can cause porosity in the weld and a dull, oxidised tungsten.

    Possible signs are a tungsten that discolours quickly, an unstable arc or unexplained weld defects. Check the O-ring whenever you change the cap, make sure it is present, clean and uncut, and replace it if it looks flat, cracked or hard. Use the O-ring the maker specifies, and tighten the collet body or gas lens before the back cap, because reversing the order can let air in.

    Shop Similar Categories